Multiple Dwelling Unit GPON ONT: ZNID-GPON-9108
The zNID-GPON-9208 ONT was designed to serve multiple customers.
This product is ideal for multiple dwelling units (MDU) with up to eight (8) tenants. It provides eight Voice ports and eight 10/100/1000bT LAN ports, plus a ninth 10/100/1000bT LAN port for connecting an auxiliary device such as a Wi-Fi access point or video camera. The 9208 also provides eight (8) MoCA ports that allow deployment of services over the existing coax cables. The MoCA port could be used to provide IPTV services.
Each Voice port and LAN port is individually controlled, and can be assigned to specific customers. A customer can have as many POTS and LAN ports as desired, with unique VLANs configured per customer to ensure full isolation of each customer’s data traffic.
All 9000 series MDU ONTs provide the same voice features found on the 4200 series of Single Family Unit (SFU) ONTs. Both MGCP and SIP are supported for direct connection to a VoIP Softswitch. This flexibility allows DZS’ 4200 and 9000 Series ONTs to work in nearly all Telco networks, with interoperability support for a broad array of Softswitches.
All LAN ports are capable of supplying Power over Ethernet (IEEE 802.3at compliant) making this also an ideal product for applications such as video surveillance.
All 9000 series ONTs are designed for outdoor use. The weather proof enclosure can be installed in two stages for carriers that want to terminate the fiber before installing the active components.
The standard Cable Entrance Box provides a single 1.5″ diameter conduit opening, so that the power, voice, and LAN, cables can be routed from the zNID-9000 series product into the building in a secure fashion. An optional Large Cable Entrance Box is available that provides 4 separate conduit opening and extra room for cable slack storage for installations that require secure routing of the power, voice, LAN and coax cables in separate conduits.
All 9000 series ONTs share a common SW architecture with the 4200 series of zNIDs. It has the same intuitive Web interface and command line interface that is found on the 4200 series of zNIDs. The zNID is also managed by the DZS Network Management System (ZMS), using SNMP. Software upgrades and configuration backups can be handled automatically by the ZMS using the CPE Manager feature.
The zNID-9208 is designed for MDU applications. One ONT can provide service to eight customers.
Although the zNID-9208 is ideal for MDU applications, it can be used in many other applications.
The unit’s Power over Ethernet ports could be used to power up to nine IP cameras, providing an excellent solution for video surveillance. With the GPON fiber uplink, there is plenty of bandwidth available for the video data.
The Network Timing Reference that is recovered from the fiber uplink is delivered over the eight LAN ports to the attached devices. This enables Pseudo-wire devices such as the ETHX-3142 to operate in synchronous timing mode, deriving the T1 or E1 Service Clock directly from the 9208’s Ethernet clock.
- ZNID-GPON-9208: Outdoor MDU ONT, 8 x Voice, 9x GE, 8x MoCA.
- ZNID-GPON-9208-OPTITAP: Outdoor MDU ONT, 8 x Voice, 9x GE, 8x MoCA, with OptiTap connector.
- ZNID-GPON-9208-EL: Outdoor MDU ONT, 8 x Voice, 9x GE, 8x MoCA, Electronics only. (Fiber enclosure sold separately).
- ZNID-ENCL-9000: Fiber termination enclosure used to terminate and store fiber.
- ZNID-ENCL-9000-OPTITAP: Fiber termination enclosure used to terminate and store fiber with the OptiTap connector.
- ZNID-BATT-IN-48VDC-NA: Indoor 48VDC, 50W, Battery Backup Unit
- ZNID-BATT-OUT-48VDC-NA: Outdoor 48VDC, 150W, Battery Backup Unit
- ZNID-BATT-CABLE-10METER: 7 Wire Power Cable used with indoor Battery Backup Unit, 10 m
- ZNID-BATT-CABLE-7COND-1000FT: 1000 foot spool of 7 conductor cable for use with Battery Backup Unit